Appliance Repair Brands We Service in Middle Tennessee

Whatever's on the badge, the failures look pretty similar underneath: a fridge that won't cool, a dryer that won't heat, a dishwasher that won't drain. We work on appliances across most major brands, and this list covers the ones we see most often.

None of this implies a relationship with the manufacturers themselves. We're an independent repair company, not a factory service center for any brand listed here, and we fix these appliances the same way regardless of who made them. If you know your brand and want to skip ahead, call (615) 412-2497 and describe what's going on.

Samsung and LG

Samsung and LG show up constantly in refrigerator calls, particularly for a unit that's running but not cooling, or a freezer that's frosting over. Both brands lean on electronic control boards more than older mechanical designs, so a fault that looks like a cooling problem is sometimes a board issue instead. Ice makers on both brands also generate their own share of calls, usually a stuck fill valve or a jammed auger rather than anything wrong with the fridge itself. Samsung appliance repair and LG appliance repair both start with the same diagnostic: is it the sealed system, the fan, or the board.

Whirlpool and GE

Whirlpool and GE are common across older Middle Tennessee homes, especially builder-grade dishwashers and dryers installed when a house was built. A Whirlpool dishwasher not draining, or a GE dryer that tumbles without heat, are two of the more frequent calls we get on these brands. Whirlpool appliance repair and GE appliance repair cover the full range of these units.

Maytag and KitchenAid

Maytag and KitchenAid are usually solid, straightforward machines mechanically, which means most failures trace back to a single worn part rather than a cascade of issues. A dead heating element in a Maytag dryer or a cracked bake element in a KitchenAid range are typical single-part fixes. Maytag appliance repair and KitchenAid appliance repair handle these directly.

Frigidaire and Bosch

Frigidaire refrigerators and Bosch dishwashers both turn up regularly, and both tend to be sensitive to Nashville's hard water over time. Scale buildup on a Bosch dishwasher's spray arm or fill valve, or a leaking Frigidaire water dispenser, are common enough that we see them every week. Frigidaire appliance repair and Bosch appliance repair cover both.

Miele and Thermador

Miele and Thermador appliances are built to a higher standard, and the parts tend to be model-specific rather than universal. That doesn't change the diagnosis process, but it does mean parts sometimes have to be ordered rather than sourced same-visit, and we'll tell you plainly if that's the case before starting anything. Miele appliance repair and Thermador appliance repair cover these units.

Sub-Zero and Viking

Sub-Zero and Viking are common in Belle Meade, Forest Hills, and other Nashville neighborhoods with a lot of higher-end kitchens. These are refrigeration and range systems built for the long haul, and when something does fail, it's often a control board or a compressor component rather than anything cosmetic. Sub-Zero and Viking repair covers both brands.

Other Brands We Also See

We also see Amana and Kenmore appliances regularly, particularly older dryers and refrigerators still running in established Middle Tennessee neighborhoods. Both are straightforward to work on. Call (615) 412-2497 and describe the symptom either way, even if it's a brand not listed above; the diagnostic process doesn't change much from one manufacturer to the next.

When to Stop and Call

Regardless of brand, stop and call if you smell gas near a range or oven. Leave it off and don't attempt to relight it; call the gas utility first, then us.

Stop and call if a dryer of any brand is producing a burning smell or the outside housing is running hot, since that points at a blocked vent and a real fire risk. Stop and call if a refrigerator has been warm for more than a few hours. And stop and call any time the failed part is buried behind a panel or a control board you're not comfortable opening yourself.

What This Means for Your Repair

The brand on the front tells us roughly what to expect, not exactly what to charge. What actually drives the cost is which part failed, whether the appliance uses a sealed refrigeration system, and whether the specific part is available locally or needs to be ordered. We explain all of that, and the repair itself, before any work starts.

If the part is available locally, most repairs finish on the first visit. If it has to be ordered, we come back once it arrives. That's true whether it's a common Whirlpool dishwasher part sitting on a nearby shelf or a model-specific board for a Sub-Zero unit that has to come from the manufacturer. Either way, call (615) 412-2497 between 8am and 7pm, Monday through Saturday, and tell us the brand and the symptom, and we'll take it from there.